Infant Incubator

Infant Incubator
Model No. InfantCare 6 Plus




Optional Functions:

  • LCD Touch Screen
  • X ray cassette tray&Integrated scale
  • Electronic Elevator
  • Upside LED phototherapy unit
  • Downside LED phototherapy unit
  • Air&Oxygen Blender
  • Spo2

    • Infant Incubator

    • Product name: InfantCare 6 Plus
    • Twins Holding Capability
    • Microprocessor based servo controlled temperature system
    • Control modes: Air mode and baby skin mode
    • Humidity control and oxygen concentration control system
    • Set temperature, air temperature, baby skin temperature, humidity,oxygen concentration, timer and heating power are displayed separately by LED
    • Self - testing function, various failure alarms by audible and visual
    • Alarm function: Power failure,Over temperature,Temperature deviation,Fan failure,Temperature sensor failure,Low water level, O2 concentration deviation
    • 37° temperature set function
    • Embedded integrated sensor module
    • Triple protection for over temperature with separate cut off device, more safety system
    • The inclination of infant bed is adjustable
    • Double wall hood, 4 operating windows and 2 iris ports,5 infusion seals
    • Independent locking device for front door
    • RS232 connector, Oxygen inlet,1 tray



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 650V
    • Operating condition:
        Environment temperature 20°C     30°C Environment relative humidity 30     75 Environment air velocity of flow <0.3m/s
    • Air temperature control range 25°C    37°C   37.1°C   38°C
    • Skin temperature control range 32°C    37°C    37.1°C    38°C
    • Humidity display range 0    100
    • Humidity control range 40    95
    • Oxygen concentration display range 0    100
    • Oxygen concentration control range 20    60
    • Oxygen concentration deviation alarm ±5
    • Skin temperature sensor accuracy ±0.3°C
    • Temperature fluctuation ±0.5°C
    • Uniformity of mattress temperature ≤ 0.8°C
    • Warm-up time(from 25°C)    30min
    • Internal noise level    50dB(A)
    • Infant bed tilt angle ±10°
    • Mattress size 65cm(L)*37cm(W)
    • Trough capacity 1000mL
    • Air filter 0.5µm

    Infant Incubator

    Infant Incubator
    Model No. InfantCare 6




    Optional Functions:

  • LCD Touch Screen
  • X ray cassette tray&Integrated scale
  • Electronic Elevator
  • Upside LED phototherapy unit
  • Downside LED phototherapy unit
  • Air&Oxygen Blender
  • Spo2

    • Infant Incubator

    • Product name: InfantCare 6
    • Twins Holding Capability
    • Microprocessor based servo controlled temperature system
    • Control modes: Air mode and baby skin mode
    • Humidity control and oxygen concentration control system
    • Set temperature, air temperature, baby skin temperature, humidity,oxygen concentration, timer and heating power are displayed separately by LED
    • Self - testing function, various failure alarms by audible and visual
    • Alarm function: Power failure,Over temperature,Temperature deviation,Fan failure,Temperature sensor failure,Low water level, O2 concentration deviation
    • 37° temperature set function
    • Embedded integrated sensor module
    • Triple protection for over temperature with separate cut off device, more safety system
    • The inclination of infant bed is adjustable
    • Double wall hood, 4 operating windows and 2 iris ports,5 infusion seals
    • Independent locking device for front door
    • RS232 connector, Oxygen inlet,1 tray



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 650V
    • Operating condition:
        Environment temperature 20°C     30°C Environment relative humidity 30     75 Environment air velocity of flow <0.3m/s
    • Air temperature control range 25°C    37°C   37.1°C   38°C
    • Skin temperature control range 32°C    37°C    37.1°C    38°C
    • Humidity display range 0    100
    • Humidity control range 40    95
    • Oxygen concentration display range 0    100
    • Skin temperature sensor accuracy ±0.3°C
    • Temperature fluctuation ±0.5°C
    • Uniformity of mattress temperature ≤ 0.8°C
    • Warm-up time(from 25°C)    30min
    • Internal noise level    50dB(A)
    • Infant bed tilt angle ±10°
    • Mattress size 65cm(L)*37cm(W)
    • Trough capacity 1000mL
    • Air filter 0.5µm

    Infant Incubator

    Infant Incubator
    Model No. InfantCare 4




    Optional Functions:

  • LCD Touch Screen
  • X ray cassette tray&Integrated scale
  • Electronic Elevator
  • Upside LED phototherapy unit
  • Downside LED phototherapy unit
  • Double wall hood
  • Air&Oxygen Blender

    • Infant Incubator

    • Product name: InfantCare 4
    • Microprocessor based servo controlled temperature system
    • Control modes: Air mode and baby skin mode
    • Humidity is adjustable continuously
    • Set temperature, air temperature, baby skin temperature, timer and heating power
    • are displayed separately by LED
    • Integral timer to record therapy time
    • Self - testing function, various failure alarms by audible and visual
    • Alarm function: Power failure,Over temperature,Temperature deviation,Fan failure,Temperature sensor failure
    • >37°C temperature set function
    • Triple protection for over temperature with separate cut off device, more safety system
    • The inclination of infant bed is adjustable
    • Single wall hood, 4 operating windows and 2 iris ports,5 infusion seals
    • Independent locking device for front door
    • RS232 connector, Oxygen inlet, 1 tray



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 650V
    • Operating condition:
        Environment temperature 20°C     30°C Environment relative humidity 30     75 Environment air velocity of flow <0.3m/s
    • Air temperature control range 25°C    37°C   37.1°C   38°C
    • Skin temperature sensor accuracy ±0.3°C
    • Temperature fluctuation ±0.5°C
    • Uniformity of mattress temperature ≤ 0.8°C
    • Warm-up time(from 25°C)    30min
    • Internal noise level    50dB(A)
    • Infant bed tilt angle ±10°
    • Mattress size 65cm(L)*37cm(W)
    • Trough capacity 1200mL
    • Air filter 0.5µm

    Infant Incubator

    Infant Incubator
    Model No. InfantCare 2




    Optional Functions:

  • Upside phototherapy unit
  • Downside phototherapy unit
  • Removable anxial DC-Fan
  • Alumminum alloy material
  • Two level adjustable of humididity

    • Infant Incubator

    • Product name: InfantCare 2
    • Microprocessor based servo controlled temperature system
    • Control modes: Air mode
    • Humidity is adjustable in two levels
    • Set temperature, air temperature, heating power are displayed separately by LED
    • Self - testing function, various failure alarms by audible and visual
    • Alarm function:
      Power failure,Over temperature,Temperature deviation,Fan failure,Temperature sensor failure
    • >37°C temperature set function
    • Triple protection for over temperature with separate cut off device, more safety system
    • The inclination of infant bed is adjustable
    • Single wall hood, 4 operating windows and 2 iris ports,3 infusion seals
    • locking device for front door
    • RS232 connector, 1 tray



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 650V
    • Operating condition:
        Environment temperature 20°C     30°C Environment relative humidity 30     75 Environment air velocity of flow <0.3m/s
    • Air temperature control range 25°C    37°C   37.1°C   38°C
    • Skin temperature control range 32°C    37°C    37.1°C    38°C
    • Humidity display range 0    100
    • Humidity control range 40    95
    • Oxygen concentration display range 0    100
    • Skin temperature sensor accuracy ±0.3°C
    • Temperature fluctuation ±0.5°C
    • Uniformity of mattress temperature ≤ 0.8°C
    • Warm-up time(from 25°C)    30min
    • Internal noise level    50dB(A)
    • Infant bed tilt angle ±10°
    • Mattress size 65cm(L)*37cm(W)
    • Trough capacity 1200mL
    • Air filter 0.5µm

    Transport Incubator

    Transport Incubator
    Model No. AmpCare 1




    Optional Functions:

  • Infant Resuscitator
  • Low pressure aspirator
  • Ambulance trolley

    • Transport Incubator

    • Product name: AmpCare 1
    • Air mode and baby mode controlled by micro-computer
    • Use AC Power and DC Power alternatively,DC 12V or DC 24V Power on the ambulance
    • Set temperature,air temperature,skin temperature and internal battery power are displayed by LED
    • Self-testing function,various failure alarms by audible and visual
    • Alarm function:
      Power failure,Over temperature,Temperature deviation,Fan failure,Temperature sensor failure
    • Double wall hood with side door and front door,4 operating windows and 2 iris ports,5 infusion seals
    • The infant bed can be pulled out from side door easily
    • Natural air flow humidity
    • The height od whole unit is adjustable
    • Oxygen supply system
    • LED observe light,adjustable brightness
    • Build-in storage cabinet



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 450V
    • Operating condition:
        Environment temperature 10°C     30°C Environment relative humidity 30     75 Environment air velocity of flow 1m/s
    • Air temperature control range 25°C    37°C   37.1°C   38°C
    • Skin temperature sensor accuracy ±0.3°C
    • Skin temperature control range 25°C    37°C   37.1°C   38°C
    • Air/Skin temperature sensor accuracy ±0.3°C
    • Temperature fluctuation ±1°C
    • Uniformity of mattress temperature ≤ 1.5°C
    • Air temperature deviation alarm ±3°C
    • Skin temperature deviation alarm ±1°C
    • Warm-up time(from 25°C)    40min
    • Internal noise level    60dB(A)
    • Main battery DC12V 40AH,Li-ion battery
    • Charge time 12hours
    • Battery use time 2hours
    • Auxiliary battery DC8.4V 0.17AH,Li-ion battery
    • Mattress size 63cm(L)*32cm(W)
    • Trough capacity 1200mL
    • Air filter 0.5µm

    Infant Incubator & Radiant Warmer

    Infant Incubator & Radiant Warmer
    Model No. MultiCare-OP




    Optional Functions:

  • CCD Camera

    • Infant Incubator

    • Product name: MultiCare-OP
    • Incubator and Warmer mode, servo controlled by micro-computer, convert automatically
    • Multi audible and visual alarm finctions, self-testing finction
    • 10.2" color LCD display touchscreen with 24h parameter graph trends
    • Electrical lifting canopy to convert to warmer mode from incubator mode
    • LED observe light with brightness adjustable
    • Infant bed can be pulled out bidirectionally
    • Foor pedal electrical height adjustment system for optimum adaptation to clincal users
    • Electrical infant bed tiliting system
    • Built-in baby scale system, with real-time graph
    • Downside phototherapy unti
    • SPO2 monitor system
    • 37° temperature set function
    • Triple protection for ober temperature with separate cut off device, more safety system
    • Double fan, air curtain strucure, better temperature uniformity , reduce heat loss during operation
    • Double wall hood, 4 operating windows, 1 iris port, 9 big infusion seals, independent locking device
    • Oxygen inlet
    • One tray and one big drawer
    • Data stroage interface and RS232 data interface



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 1000VA
    • Operating condition:
        Environment temperature 20°C     30°C Environment relative humidity 30     75 Environment air velocity of flow 0.3m/s
      Baby Incubator Mode (Close Mode)
    • Air temperature control range 25°C    37°C   37.1°C   39°C
    • Skin temperature control range 32°C    37°C   37.1°C   39°C
    • Skin temperature sensor accuracy ±0.2°C
    • Temperature fluctuation ±0.5°C
    • Uniformity of mattress temperature ≤ 0.8°C
    • Humidity display range   0% - 99%
    • Humidity control range   30% - 95%
    • Oxygen Concentration display range   0% - 100%
    • Oxygen Concentration control range   20% - 60%
    • Warm-up time (from 25°C)  <30min
      • Infant Radiant Warmer Mdoe (Open Mode)
    • Skin temperature control range 32°C     38°C
    • Uniformity of mattress temperature ≤ 2°C
    • Warm-up time(from 25°C)    45min

    Infant Radiant Warmer

    Transport Incubator
    Model No. OpenCare 2




    Optional Functions:

  • Infant Resuscitator
  • Low pressure aspirator
  • Air&Oxygen Blender
  • Gel mattress

    • Infant Radiant Warmer

    • Product name: OpenCare 2
    • Microprocessor based servo controlled temperature system
    • Three modes: pre-warm, manual or automatic
    • Audible and visual Alarm functions : Power failure, temperature deviation, temperature sensor failure, skin temperature failure, over temperature
    • 8 inch LCD colorful touch screen
    • Carbon steel heater more effective
    • Special design inclined heater head is more convenience for X ray test image
    • Digital skin temperature sensor,the data is accurate and stable
    • Alloyed bracket,fastness
    • Integral timer to record therapy time
    • Bigger mattress
    • Skin temperature trend for 2 hours
    • Electric infant bed tilt angle is ±12°
    • Four transparent protector folded with 2 infusion seals
    • Convenient X-ray cassette tray under infant bed
    • Electric height adjusted suit for operation
    • With observe light,oxygen supply system and LED phototherapy
    • With RS-232 connector,2 trays and 2 drawers



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 1100V
    • Operating condition:
        Environment temperature 18°C     30°C Environment relative humidity 30     75 Atmospheric Pressure 700~1060hpa Environment air velocity of flow < 0.3m/s
    • Skin temperature control range 32°C ~   38°C
    • Temperature control accuracy ≤0.5°C
    • Skin temperature sensor accuracy ±0.3°C
    • Mattress temperature uniformity ≤2°C
    • Infant Bed tilt angle ±12°
    • Warm-up time(from 25°C)   ≤ 30min
    • LED observation light 3W
    • Distance from heater to mattress 80cm
    • Mattress size 78cm(L)*64cm(W)
    • Timer range 0~99h59min
      • Height adjustable range 0~20cm
    • LED phototherapy light 36cm 620-2800µw/c ㎡
    • LED phototherapy light 50cm 400-1620µw/c ㎡
    • Oxygen cylinder 6L X 2
    • Oxygen flow meter 0-10L/min

    Infant Radiant Warmer

    Transport Incubator
    Model No. OpenCare 1 PLUS




    Optional Functions:

  • LCD Touch screen
  • Air temp&count down timer
  • Electronic Elevator
  • Air&Oxygen Blender
  • Gel mattress
  • Infant Resuscitator

    • Infant Radiant Warmer

    • Product name: OpenCare 1 PLUS
    • Microprocessor based servo controlled temperature system
    • Three modes: pre-warm, manual or automatic
    • Set temperature and skin temperature display separately
    • Special design inclined heater head is more convenience for X rays
    • Carbon steel heater for more effectivity
    • Audible and visual Alarm functions : Power failure, temperature deviation, temperature sensor failure, skin temperature failure, over temperature
    • APGAR timer to record therapy time
    • Convenient X-ray cassette under infant bed
    • Electric inclination of infant bed
    • LED observation light adjustable,brightness adjustable
    • Four Transparent protector folded with 2 infusion seals
    • LED phototherapy unit,Oxygen supply system
    • Bigger infant bed
    • Built in low pressure aspirator
    • With RS-232 connector,2 trays and 2 drawers



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 1100V
    • Operating condition:
        Environment temperature 18°C     30°C Environment relative humidity 30     75 Atmospheric Pressure 700~1060hpa Environment air velocity of flow 0.3m/s
    • Skin temperature control range 32°C    38°C
    • Skin temperature control accuracy ±0.5°C
    • Skin temperature sensor accuracy ±0.3°C
    • Mattress temperature uniformity 2°C
    • Temperature fluctuation ±1°C
    • Mattress temperature uniformity 2°C
    • Infant Bed tilt angle ±12°
    • Warm-up time(from 25°C)    30min
    • Heater head horizontal ±90°
    • LED observation light 3W
    • Distance from heater to mattress 80cm
    • Mattress size 78cm(L)*64cm(W)
    • Timer range 0~99h59min
    • LED phototherapy light 36cm 620-2800µw/c ㎡
    • LED phototherapy light 50cm 400-1620µw/c ㎡
    • Low pressure aspirator:
        Max vacuum adjustable ≥-25kpa(-188mmHg) Storage bottle 1000mL Oxygen cylinder 6L X 2 Oxygen flow meter 0-10L/min

    Infant Radiant Warmer

    Transport Incubator
    Model No. OpenCare 2




    Optional Functions:

  • Infant Resuscitator
  • Low pressure aspirator
  • Air&Oxygen Blender
  • Gel mattress

    • Infant Radiant Warmer

    • Product name: OpenCare 2
    • Microprocessor based servo controlled temperature system
    • Three modes: pre-warm, manual or automatic
    • Audible and visual Alarm functions : Power failure, temperature deviation, temperature sensor failure, skin temperature failure, over temperature
    • 8 inch LCD colorful touch screen
    • Carbon steel heater more effective
    • Special design inclined heater head is more convenience for X ray test image
    • Digital skin temperature sensor,the data is accurate and stable
    • Alloyed bracket,fastness
    • Integral timer to record therapy time
    • Bigger mattress
    • Skin temperature trend for 2 hours
    • Electric infant bed tilt angle is ±12°
    • Four transparent protector folded with 2 infusion seals
    • Convenient X-ray cassette tray under infant bed
    • Electric height adjusted suit for operation
    • With observe light,oxygen supply system and LED phototherapy
    • With RS-232 connector,2 trays and 2 drawers



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 1100V
    • Operating condition:
        Environment temperature 18°C     30°C Environment relative humidity 30     75 Atmospheric Pressure 700~1060hpa Environment air velocity of flow < 0.3m/s
    • Skin temperature control range 32°C ~   38°C
    • Temperature control accuracy ≤0.5°C
    • Skin temperature sensor accuracy ±0.3°C
    • Mattress temperature uniformity ≤2°C
    • Infant Bed tilt angle ±12°
    • Warm-up time(from 25°C)   ≤ 30min
    • LED observation light 3W
    • Distance from heater to mattress 80cm
    • Mattress size 78cm(L)*64cm(W)
    • Timer range 0~99h59min
      • Height adjustable range 0~20cm
    • LED phototherapy light 36cm 620-2800µw/c ㎡
    • LED phototherapy light 50cm 400-1620µw/c ㎡
    • Oxygen cylinder 6L X 2
    • Oxygen flow meter 0-10L/min

    Infant Phototherapy Unit

    Infant Phototherapy Unit
    Model No. PH-200




    Infant Phototherapy Unit

    • Product name: PH-200
    • LED Blue bulb as the radiant source, irradiating uniformly and efficient.
    • Circle 360 double sides for more effective radiantion
    • Small in size, light and high irradiation
    • Two phototherapy modes:up side phototherapy and down side phototherapy,can be use separately
    • Therapy time of phototherapy units up and down side are separately display
    • Automatically record each therapy time and total used therapy time
    • Air temperature and skin temperature separately display
    • Power off memory, alarm silence key , locking key and self-examination function
    • Four alarm functions: Power failure, probe failure, over temperature, fan failure
    • Count down setting avilable
    • Two sides observation parts
    • Air spring structure make the hood is easy open and close.
    • The aluminum alloy is applied on the base ,with 2 drawers and 1 tray



      • Specification:
    • Power supply AC220V±10% 50Hz±2%
    • Power input ≤400VA
    • Blue light wavelength: 420nm~490nm
    • Circle 360 light radiation: 3700µW/c㎡
    • Up side light radiation: 3300µW/c㎡
    • Down side light radiation: 2400µW/c㎡
    • Life span of blue light tube: ≥20000hours
    • Air temperature display range: 0~45.0°C
    • Skin temperature display range: 0~45.0°C
    • Time accuracy: 1min/2h
    • Count-up time range: 0~99.9 hours
    • Count-down time range: 1min~99.9hours
    • Total cumulative time: 0~999999hours
    • Mattress size: 613X300mm
    • Working environment:
        Ambient temperature t: +18°C   +30°C Relative humidity: 30%   75% Atmospheric pressure: 700hpa~1060hpa
    Optional Functions:

  • Gel mattress

    • Infant Phototherapy Unit

    Infant Phototherapy Unit
    Model No. PH-10




    Infant Phototherapy Unit

    • Product name: PH-10
    • Equal light distribution
    • High intensity
    • Quiet, no noise
    • Five blue fluorescent lights
    • The angle of head and height are adjustable
    • Steel support pole, four castors with brake
    • Integral time record therapy time



      • Specification:
    • Power supply AC110/220V 60/50Hz
    • Power input 120VA
    • Blue light wavelength: 400nm~550nm
    • Total Irradiance for bilirubin 1300µW/c#13217;
    • Height Adjust Range 1100~1600mm
    • Pitching angle of phototherapy head ±90°
    • Time Accurancy 1min/12h
    • Integral time range 0h    9999h   59min
    • Working environment:
        Ambient temperature t: +18°C   +30°C Relative humidity: 10%   85% Atmospheric pressure: 700hpa~1060hpa

    Follow Us

    Email Updates

    Join our digital mailing list and get news
    special deals and latest catalogs

    Your subscribe request has been sent!